vendredi 20 octobre 2017

Blouson cuir de buffle - buffalo leather Jacket -

Blouson cuir de  buffle - buffalo leather Jacket -

Size: Large;
for a man between 170/185cm, 70/80kg.

A bit used but in excelent conditions; cleaned

The ONLY thing unperfect is a very little hole in the liner, see picture.





samedi 7 octobre 2017

Flat track champion frame type seat

Flat track champion frame type seat
Available for sale
90 euros

Front Width-----------11cm
Max length-----------69 cm
Height, front---------------3 cm
Max Width--------------26,5 cm
Length of the low horizontal border---34 cm



lundi 28 août 2017

BMW R series Short & Light Rear Fiberglass Fender

-Sharkit home design; you wont find this elsewhere.
-Fit the stock subframe; check the picts up to be sure of the subframe type.
-On the subframe only the rear hook must be removed, nothing else. Check the pictures up.
-Fender comes without holes for fixing: you will have to drill them. Easy...
-Finition: usualy fiber glass fender finition is grey or white primer. Black gelcoat possible, ask me.



lundi 21 août 2017

mercredi 21 juin 2017

"4 bottom screws" tank fixing system

Suggestion to fix on all XR, XL, NX650 frame the Sharkit dedicated composite tanks;
Two or four screws are set at the tank bottom, as shown on the picture below.
This is how your tank can be delivered.

You have to make a front tank support with a folded metal sheet, set as shown on the frame.
NO NEED to weld to do this, only common tools and material. 



DO NOT forget silent blocks. Composite never in direct contact with the frame, remember !!

Apparemment vaut mieux faire deux pattes, une de chaque coté, fixées sur les point d'attaches du moteur (en rouge dessin dessous)
 

vendredi 2 juin 2017

Honda XL 600 LM kit -- Modifying the stock tank support

Modifying the stock tank support to set the kit tank;
-no need to weld
-no need to look for extra parts difficult to find
-basic hand/electric tooling will make it









Honda XL 600 LM kit

Tank size & proportions






Honda XL 600 LM kit

Work in progress

White frame: XLM
Silver frame: Dominator

samedi 27 mai 2017

jeudi 11 mai 2017

BMW étude/study "Color Dream"

"Blue Kawa"
"Roses & Skulls"
"Orange skull"

BMW "Zungastream"

Etude/study
Recyclage du carenage/Fairing recycling


dimanche 7 mai 2017

BMW: fits goood ! Seat FINE fitting test

 Seat FINE quick  fitting test;


vendredi 28 avril 2017

vendredi 21 avril 2017

Kit: plaque phare / head light


Plaque phare Kedo Julien, à 350 euros...aaarg !
Neuf; à recouper et ajuster suivant la moto pour un beau résultat

Diamètre de l'arrondi extérieur de la plaque support: 55mm
Plaque support: haut 257mm, larg 248mm (40 euros)

Deux petits types de support d'optiques, les noirs ou les blancs , voir différences sur la photo

Plaque de base--------------------38 euros
Support optique 70mm face ouverte: 16 eur (noir sur les fotos)
Support optique 70mm face fermée: 18 eur (blanc sur les fotos)

Support optique 150mm fermé: 32 eur (blanc sur les fotos)
Support optique 180mm ouvert: 36 eur (blanc sur les fotos)

Modulaire, différents groupages possibles (voir image)

Un type de support grand optique, diamètre 150mm  ou 180mm

Ne pas hésiter à mailer pour plus d'infos, j'ai d'autres choses; merci




180mm

180, 70, 150mm